As in the original Slot Machine software, the “Clickit” routine simulates the sound of the wheels turning. If all the colors match, then the “Winner” routine is called. The “Winner” routine momentarily lights all of the LEDs on a strip and then each strip is turned on/off in sequence.

• Arduino Slot Machine
• Arduino Slot Machine With Wheels Spacers
• Arduino Slot Machine With Wheels Heavy Duty
• Arduino Slot Machine With Wheels Bearings
• Arduino Slot Machine With Wheels Machine

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

• 37,102 views
• 8 comments
• 95 respects

Components and supplies

DFRobot Stepper Motor NEMA 17	×	3
DFRobot Microswitch for homing	×	3
DFRobot 5-8mm Coupler	×	1
Pulleys and Timing Belt	×	1
8-16mm Bearing	×	10
V slot wheels	×	3
500mm 2020 Aluminum Extrusion	×	1
Arduino UNO	×	1
GRBL CNC Shield	×	1
Theremino Driver DRV8825 for Stepper Motors for Theremino System	×	3

Necessary tools and machines

Apps and online services

Autodesk Fusion 360

Arduino IDE

GRBL Firmware

Inkscape

About this project

Purpose

As a serious maker, I have several CNC machines, including two 3D printers and a CNC router. But what if I wanted something else, like a laser engraver or a PCB milling machine? So I set off to do just that: build an inexpensive CNC machine that could have many different attachments, all while controlled through a simple interface of G-code.

Demonstration

Design

I started by thinking of a free-wheeled machine that could have an infinite Y-traverse, but it proved to be too cumbersome and inaccurate.

So I chose to use V-slotted rails with wheels instead. I then went on Fusion and designed several parts, including the entire X and Z axis parts.

Making the Bedand Y Axis

The bed (Y axis) is comprised of two 500mm or 800mm V-slot rails arranged in parallel. There are four plastic pieces that hold two wheels each, allowing for easy travel of the bed along the rails. I also ran a timing belt across the Y axis under the bed, so that when the Y axis stepper rotates the belt moves.

Making the X Axis

The X axis is comprised of a single rail that holds a 3D-printed piece with four wheels. The timing belt slots into the sides of the plastic piece that pulls it either direction.

Making the Z Axis

The Z axis is based on a pulley system, so that when the stepper rotates the Z block can get pulled or lowered.

Electronics

The electronics are fairly straightforward. There is an Arduino Uno for the logic, three DRV8825s for the stepper motor drivers, an Arduino GRBL CNC shield, and three limit switches for homing. I simply plugged in the stepper drivers and adjusted the current limit potentiometers to match the 12V 6A power supply. Then I soldered the limit switches to the shield, with COM going to GND and NO (Normally Open) going to the corresponding pins. Do note that the Z axis limit pin is no longer D11, but is instead D12.

Software

I flashed the GRBL firmware to the Uno by using the example sketch and Arduino IDE. Then I downloaded the Universal G-Code Sender here: https://github.com/winder/Universal-G-Code-Sender. It lets users easily send commands and G-code files to their CNC Machines.

Usage

To test it I started by calibrating the machine. By default, there are 200 steps/mm, but those differ. So simply move the machine 5mm, then multiply five by 200, and then divide that number by the actual distance the machine moved, and change the settings accordingly. So If it took 161 steps to move 1mm on the X axis, set $100=161.000. Then use Fusion 360 or Inkscape to design and generate toolpaths to cut, engrave, or draw whatever you want.

Banggood.com Parts:

100ML Plastic Disposable Sterile Syringe -- https://goo.gl/vHxWKm

800mm Length 2020 T-Slot Aluminum Profiles Extrusion Frame-- https://goo.gl/g8ns5U

TEVO® 5Pcs One Pack 3D Printer Part POM Material Big Pulley Wheel -- https://goo.gl/DxMczs

4Pcs 5mm x 8mm Aluminum Flexible Shaft -- https://goo.gl/BfpCXR

WPL WPLB-1 Wheel Complete 4PCS RC Crawler Car Parts -- https://goo.gl/vyWVxt

Wholesale Arduino SCM & DIY Kits -- https://goo.gl/DG4gVv

Code

Custom parts and enclosures

Schematics

Author

Arduino “having11” Guy

• 35 projects
• 443 followers

Arduino Slot Machine

Published on

August 14, 2018

Members who respect this project

and 87 others

See similar projects

Arduino Slot Machine With Wheels Spacers

Arduino Slot Machine With Wheels Heavy Duty

Arduino Slot Machine With Wheels Bearings

you might like

Arduino Slot Machine With Wheels Machine

Table of contents